Step 4- Middle Leg Assembly - Baby Lock Pearl BLQF Assembly Instructions Manual

Step 4
Middle Leg Assembly
Fig. 4-1
Step 4: Middle Leg Assembly
Parts needed
1-Table Assembly
1-Upper Middle Leg
1-Lower Middle Leg
5-M8x16mm Socketed Button Head Cap Screw
QF09318-07
1-M8 Nylon Washer QF05300-157
2-Leveling Glide
Tools Required
5mm Allen Wrench
4-1: Place the upper middle leg on the center
of the table assembly and thread an M8x16mm
QF09318-07 into each corner of the mounting
plate. (Fig. 4-1 and Detail 4-1) Fully tighten
each screw with the 5mm Allen wrench.
Detail 4-1
11