Step 10- Pole Coupler Assembly - Baby Lock Pearl BLQF Assembly Instructions Manual

Step 10
Pole Coupler Assembly
Fig. 9-1
Step 10: Pole Coupler Assembly
Parts needed
8-Pole Sections
4-Pole Couplers
10-1: Join two pole sections together by
inserting a pole coupler into the end of one pole
section (as shown in Fig. 10-1), depressing
the spring button as it slides in. Continue sliding
until the spring button pops out of the hole
in the pole section. Repeat to add the second
pole section to the first to complete one pole
assembly.
10-2: Using the remaining pole couplers and
pole sections, repeat Step 10-1 to complete
three more pole assemblies.
Fig. 9-2
Pole Coupler
Fig. 9-3
Pole Section
Fig. 8-1
Fig. 10-1
Fig. 9-
21