Avaya 4600 Series Installation Manual page 28

4600 Series IP Telephone Installation Guide
2. Enter a valid value (between 0 and 7) for the new value of the 802.1 audio parameter.
The following text is displayed left-justified at the top of the display:
L2 signaling=d
New=_
where d is the value of the 802.1 signaling parameter.
3. Enter a valid value (between 0 and 7) for the new value of the 802.1 signaling parameter.
The following text is displayed left-justified at the top of the display:
L3 audio=dd
New=_
where dd is the value of the Differential Services audio parameter.
4. Enter a valid value (between 0 and 63) for the new value of the Differential Services audio
parameter.
The following text is displayed left-justified at the top of the display:
L3 signaling=dd
New=_
where dd is the value of the Differential Services signaling parameter.
5. Enter a valid value (between 0 and 63) for the new value of the Differential Services signaling
parameter.
If no new values were entered during this procedure, the following text is displayed left-justified
at the top of the display:
No new values.
#=OK
Press # to terminate the procedure.
If new values were entered during this procedure, the following text is displayed left-justified at
the top of the display:
Save new values?
*=no #=yes
Press the * button to terminate the procedure, or the # button to save the new values. If you
press the # button, the following text is displayed:
New values
being saved
The new values are saved, and the user interface is restored to its previous state.
Static Addressing Installation
3-6