Appendix C: Multi-Vlan Example - Avaya Application Solutions Deployment Manual

Appendix C: Multi-VLAN example

Figure 93: Sample Multi-VLAN scenario for Cajun P330 code 3.2.8 and Cisco
multi-VLAN scenario. Suppose there is a Cisco router that is connected to a P330 switch that
contains two VLANs, one for the VoIP devices and one for the personal computers. To conserve
ports and cabling, the computers are connected to the telephones and the telephones are
connected to the P330 switch.
Figure 93: Sample Multi-VLAN scenario for Cajun P330 code 3.2.8 and Cisco
To configure the multi-VLAN example, proceed as follows:
Table 90: Command set and explanations for multi-VLAN example
Command
Cisco router configuration
interface FastEthernet0/1
description 802.1Q trunk interface
!
interface FastEthernet0/1.1
C-LAN
vlan 10
192.168.10.1
f0/1
1/1
Cisco Router
192.168.1.254
1/12
192.168.10.254
vlan 1
192.168.1.100
DHCP Server
TFTP Server
G600/G650
MedPro
vlan 10
192.168.10.2
1/2 1/3
1/5
Cajun P330
vlan 1
192.168.1.7
Notes
is a sample
vlan 1
192.168.10.7
AVAYA IP
Phone
PC
cynds307 KLC 121003
Issue 3.4.1 June 2005
1 of 5
395