Panasonic EASA-PHONE KX-T123211D Installation Manual page 99

Do not disturb
Call forwarding
Call waiting
Data line security
Dial call pickup deny
Absent message
Timed reminder
Station lock
Pickup dial
DSS parameters
Console type
Pair extension
DSS connection
DSS button assignment
Feature button assignment
Speed dial
Speed access codes (00 through 99) in
which phone numbers are stored may be
printed.
All parameters
System parameters
CO parameters
Extension parameters
DSS parameters
Speed Dial
Operation
To stop the
printout ;
1.
Dial (27).
2. Press the NEXT button.
3. Repeat pressing the SELECT button until
Stop Output is displayed.
4. Press the MEMORY button.
To
print System Parameters, Speed Dial or
All Parameters ;
1.
Dial (27).
" System Data Dump" will be displayed.
2.
3.
4.
Press the NEXT button.
" Menu : All Para" will be displayed and
" All Para" will blink.
Repeat pressing the SELECT button until
the desired data dump mode is displayed.
Press the MEMORY button.
SMDR printer will print out.
Repeat steps 3 to 4, to print the other data 5.
dumps.
To
print CO Parameter ;
1.
Dial (27).
2. Press the NEXT button.
3. Repeat pressing the SELECT button until
the " CO Para" is displayed. _
4.
5.
6.
7.
Press the MEMORY button.
" CO NO ? +" is displayed.
Dial the CO number (01 through 12).
When dialing (Ol),
" CO NO ? + 01" will be displayed.
Press the MEMORY button.
SMDR printer will print out.
Repeat steps 5 to 6, to print the other CO
parameter.
To
print Extension Parameter ;
1.
Dial (27).
2.
3.
Press the NEXT button.
Repeat pressing the SELECT button until the
" EXT Para" is displayed.
4. Press the MEMORY button.
" Jack NO ? +" will be displayed.
5. Dial the jack number (01 through 32).
When dialing (Ol),
" Jack NO ? + 01" will be displayed.
6. Press the MEMORY button.
SMDR printer will print out.
7
. . Repeat steps 5 to 6, to print the other jack
number.
To print DSS Parameter ;
1.
2.
3.
Dial (27).
4.
5.
6.
Press the NEXT button.
Repeat pressing the SELECT button until the
" DSS Para" is displayed.
Press the MEMORY button.
" DSS NO ? +" will be displayed.
Dial the DSS number (1 or 2j.
When dialing (l),
" DSS NO ? + 1" will be displayed.
Press the MEMORY button.
SMDR printer will print out.
7
, . Repeat steps 5 to 6, to print the other DSS
parameter.
After completing printihg, to return to the initial
mode
;
1.
Press the END button.
Programming Table
See
page 7-9.