Panasonic EASA-PHONE KX-T123211D Installation Manual page 163

To terminate the original call and talk to the new caller.
Will hear a Press CO or KM
call waiting
whose indicator
I
IIW c
tone
is flashing
call is
I Ivw
+nrminQ+nA
qUlCKly
To leave the original call on hold and talk to the new caller.
l
If both original call and new call are intercom calls:
(The ICM indicator will change into quickly flashing when the new call is reached.)
Will hear a
call waiting
tone
Press
HOLD
Dial tone
[
1
is not
heard.
Consult with
the new caller
while the
original call is
on hold
/II
Press ICM to
terminate the
2nd call and to
return to the
original call
l
If original call is CO call, and new call is CO call or intercom call:
or
If original call is intercom call and new call is CO call:
Will hear a Press
call waiting HOLD
tone
The dial
[
1
tone is
heard.
Press CO or ICM
whose indicator
is flashing
quickly
Consult with
the new caller
while the
original call is
on hold
Press CO or ICM whose
indicator is flashing slowly to
terminate the 2nd call and to
return to the original call
Description
Call waiting tone during a conversation indicates
there is a new incoming CO line call or Intercom
call.
This feature has been set beforehand in the
extension. See page 4-43.
There are Tone 1 and Tone 2 in the Call Waiting
Tone.
For changing Tone 1 into Tone 2, see " Call
Waiting Tone Selection" on page 4-64.
Operation
To terminate the original call and talk to the
new caller.
1. You will hear a call waiting tone (3 beeps).
2. Press the CO or ICM button whose
indicator is quickly flashing. The original
call is now terminated.
3. Start talking.
To leave the original call on hold and talk to the
new caller.
l
If both original call and new call are intercom
calls:
(The ICM indicator will change lighting into
quickly flashing when new call reaches.)
1. You will hear a call waiting tone (3 beeps).
4-20
2. Press the HOLD button for placing a
conversation on hold.
3. Consult with the new caller.
4. Press the ICM button to terminate the
second call and to return to the original
call.
l
If original call is CO call, and new call & CO
call or intercom call:
or
If original call is intercom call and new call is
CO call:
1. You will hear a call waiting tone.
2. Press the HOLD button for placing a
conversation on hold.
3. Press the CO or ICM button whose
indicator is quickly flashing .
4. Consult with the new caller.
5. Press the CO or ICM button whose
indicator is flashing slowly to terminate the
second call and to,return to the original call.
Conditions
l
If a call waiting tone is heard and the CO or
ICM indicator does not flash, this tone
indicates a call waiting tone by your telephone
company.
In this case, see " Call Waiting-Outside Line"
on page 4-39.