Panasonic EASA-PHONE KX-T123211D Installation Manual page 191

Setting
Lift handset
or press
SP-PHONE
To cancel
Dial " 76"
Enter Enter Dial
Dial
Dial " #"
Hang up or
hour + minute
+
" O" or ' 6," + U," or " 2"
press
(01 through 1:). (00 through 59)
" 0"
:
for AM " 1"
:
only one day
SP-PHONE
" 1"
:
for PM
I[
" 2" : every day
1
Lift handset Dial " 762#"
or press
SP-PHONE
To Confirm the setting time
Hang up or
press
SP-PHONE
Lift handset
or press
SP-PHONE
Dial " 763#" Hang up or
press
SP-PHONE
Description
If a time is set, an Alarm tone will sound at the
preset time.
Programming
Setting
1. Lift the handset or press the SP-PHONE
button.
2. Dial (76).
3. Enter the hour with 2 digits (01 through 12).
4. Enter the minute (00 through 59).
5. Dial the " 0" or " 1" .
[
0 : for AM
1 : for PM
6. DJal the " 1" or " 2" .
1 : When the time comes, an Alarm tone
sounds and the setting is automatically
cleared after it.
2 : An Alarm tone sounds every day at the
preset time.
7. Dial (#).
6. Hang up or press the SP-PHONE button.
Conditions
Proprietary telephone equipped with LCD only
can be used to confirm.
Multiple times can not be set at the same time.
Setting a new time clears the preset time.
When the preset time comes, an Alarm tone
sounds for 30 seconds.
To cancel the setting
Alarm tone
1. Lift the handset or press the SP-PHONE
lllll
1l-M
button.
5sec
2. Dial (762#).
4
w
3. Hang up or press the SP-PHONE button.
4 -
48
To confirm the setting time
1. Lift the handset or press the SP-PHONE
button.
2. Dial (763#).
Example :
0 If 10 : 10 AM has been stored, the LCD will
show below.
" Alarm 10 : 10 AM" ... only one day
" Alarm 10 : 10 AM m " ... every day
0 The LCD will show " Alarm not Stored" when
alarm time is not stored.
3. Hang up or press the SP-PHONE button.
To stop the Alarm tone
Lift the handset.