Panasonic EASA-PHONE KX-T123211D Installation Manual page 46

OPTION (cont.)
Retry Function
Time Over of Receiving Call
When press the " * " button while hearing a ringback
tone, reorder tone, busy tone or talking over the
telephone, back to the situation of dial tone and you
can call again, but you can' t retry while calling CO
line to extension with DISA.
When time over of receiving call, the call moves as
follows.
When outgoing message is registered.
Example
I
Dial to KX-T123211 with DISA.
I
When Outgoing Message Card is not installed
(If Security Type is set to None Security or Trunk
Security.)
Outgoing message will be heard
Dial to KX-Ti 23211 with DISA.
&
(If you don' t dial in 10 secinds after outgoing
message is finished. or dial the wrong number.)
I
.
I I
First dial tone will be heard.
I
w- ~
Dial to extension.
+
When dial the wrong number or call another
(If Security Type is set to All Security.)
Dial to KX-T123211 with DISA.
( 1 First dial t;;z;; be heard.
Dial the User Security Code (60000 through
l-4
Second dial tone will be heard.
I I
I
*
I
I I
Dial to extension.
When dial the wrong number or call another
n
n
If press the
q
button in case of as follows,
the call will be disconnected.
0 While outgoing message is heard.
0 While dial tone (1st or 2nd) is heard.
0 While Silence after outgoing message is
finished.
When Outgoing Message Card is installed and
outgoing message is not recorded, the call
which is sent to DISA CO is sent to general
extension.
I
+ (When operator is registered in System)
4
Call the Operator
+ (When operator is not registered in System)
I" " ' " " ' " " ' ;" ' " ' *" ' " 1
If the a button is not pressed in 10 seconds,
the call will be disconnected.
If the 18/ button is pressed in 10 seconds, First
dial tone will be heard and you can enter.
When Outgoing Message Card is not installed.
(If you don' t dial in 10 seconds)
q1
If the
q
button is not pressed in 10 seconds,
the call will be disconnected.
If the m button is pressed in 10 seconds, First
dial tone will be heard.
2 - 20