Panasonic EASA-PHONE KX-T123211D Installation Manual page 162

Electronic modular switching system
Hide thumbs Also See for EASA-PHONE KX-T123211D:
Table of Contents

Advertisement

To transfer a call after the outside party answers.
TRANSFER
number
and wait
press
for an
SP-PHONE,
answer
DSS or
other CO
To
transfer a call without announcing to the outside party.
Press
Press CO
Dial phone
Hang UP,
TRANSFER
number
press
SP-PHONE,
DSS or other CO
Description
Conditions
Outside
or intercom
calls may be transferred
to
l
If outside call is transferred
to any outside
any outside
line manually.
line, the KX-T123211 will disconnect the call
This feature is required
to be set beforehand
in
from the line after 10 minutes.
For changing
the KX-T123211.
the time, see ' CO to CO Duration Time
For programming, see page 3-72.
Limit" on page 3-30.
Operation
3 beeps tone will be heard every 5 seconds
1. You are engaged
in a call (outside or
for 15 seconds
before the call is disconnected
from the line.
intercom).
2. Press the TRANSFER
button.
l
If the outside call is transferred
to another
3. Press the CO button to which the call is
outside line through the KX-T123211, the
transferred.
KX-T123211 may not disconnect both lines
4. Dial the phone number to which the call is
after the calling party or called party hangs up
transferred.
if the calling parties line or called party line
5. For Unscreened
call transfer, replace
the
(central office exchange) does-not release a
handset back on hook or press the
CPC (Calling Party Controi) signal to the line.
SP-PHONE, DSS or other CO button except CO
However the KX-T123211 Will disconnect the
button which the call transferred.
line after the time that you have
For Screened
call transfer, wait for new party
programmed.
to answer and announce
call, then replace
the handset
back on hook or press the
0 If you want to join the transferred
call, press
SP-PHONE, DSS or other CO button except CO
the flashing (in groups of 2) CO button and if
button which the call transferred.
you want to leave the conference,
press the
To change the party to whom a call is
CONF button.
transferred before hanging up
Press the CO button whose indicator
is flashing
slowly to retrieve
the call, then repeat the
procedure
of Call Transfer.
4-19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents