Outgoing Message - Panasonic EASA-PHONE KX-T123211D Installation Manual

l
Be sure the handset is in the cradle and the SP-PHONE button is off.
e Set the MEMORY switch of the proprietary telephone to "PROGRAM".
To record
Dial " 9" Lift handset
m a H
0 Message which is recorded is played
back automatically after press the
MEMORY button.
Dial " 2" Give Press
message MEMORY
To play back only
Dial " 9" Dial " 1" Will hear
message
l
After recording or confirming, return the MEMORY switch to the "SET" position.
Description
Enables recording of message that answers
calls on the CO line set to " DISA" mode.
The record time is max. 31 seconds. One
message can be recorded.
Programming
0
Be sure the handset is in the cradle and the
SP-PHONE button is off.
0 Set the MEMORY switch of the proprietary
telephone to "PROGRAM".
1.
2.
3.
4.
To record
Dial (9). i
" Outgoing Message" will be displayed.
Lift the handset
Dial (2) and then give the message.
" Record : 00" will be displayed and then
count will start.
When finished, press the MEMORY button.
" Playback: 00" will be displayed and
message that was recorded is played back
automatically.
To play back only
1. Dial (9)
" Outgoing Message" will be displayed.
2. Dial (1)
" Playback : 00" will be displayed
Message is played back and then count will
start.
l
After recording or confirming, return the
MEMORY Switch to the "SET" position.
Condition
0
If you exceed the max. time of recording (31
seconds), Recording is automatically stopped
and Playback is started.
_
0 Optional Outgoing Message Card and Direct
Inward System Access Cards are necessary.
If a power failure takes place for about 10 days,
OGM will vanish. Then " Record OGM" will be
displayed and blink on the LCD of the extension
connected to jack no. 1.
Please record OGM again.
4 - 67