Panasonic EASA-PHONE KX-T123211D Installation Manual page 114

i.......-..............................until the desired CO number (01 through
12)
appears
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . until
the &sired jack number
appears
-I : on jack number 01
_
& :onjacknumber32 ___ I
m : to assign the same on all 32 jacks
until the desired mode appears
.=......default (all 32 jack numbers)
CD=[;;l : to assign the same on all 12 CO' s
Description
Through programming, you can select which
extensions will ring on incoming calls from the
Central Office during the day or night time.
Programming
1.
2.
3.
4.
5.
6.
0 Dial (47) for day mode.
" Day In CO" will be displayed.
0 Dial (48) for night mode.
" Night In CO" will be displayed.
Press the NEXT-button.
8.
" CO NO ?+" will be displayed.
Press the NEXT button or dial the CO number
(01 through 12).
9.
" CO 01 : vnable" will be displayed.
lack number
Repeat pressing the m button until the
desired jack number appears, or press the
cl # button and then dial the jack number.
Press the SELECT button to alternate between
" Enable" and " Disable" to select the desired
10.
11.
l
To advance to the next jack number,
press the m button.
l
To return to the previous jack number,
press the m button.
l
To go to the desired jack number,
press the
q
button and then dial the
jack number.
Repeat steps 5 to 7, to program the
assignment of the other jack numbers.
l
To advance to the next CO number, press
the NEXT button.
l
To return to the previous CO number, press
the PREV button.
l
To go to the desired CO number, press the
SELECT button and then dial the CO
number.
Repeat steps 4 to 9, to program the
assignment of the other CO numbers.
To return to the initial program mode, press
the END button.
mode.
Press the MEMORY button.
The LCD will stop blinking.
Programming Table
See page 7-16 or 7-l 7.
3-54