Panasonic EASA-PHONE KX-T123211D Installation Manual page 64

System Feature
L
r.............................................................. . . . . . . . . . . . . . . . . . . . . . _ enterthe
year
with 2digits.
1811813
988 year
,......-.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . until the desired
month is
displayed
i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . enter the day with
1 or 2 digits
.I . . . . . . . . . . . . . . . . . . . . . . . . . .._ until the desired day of the
week is displayed
;" " " " ' enter the hour with 1 or 2 digits
: :" ..- enter the minutes with 2 digits
: :
: :
: i :' - until the desired
AM/PM is
: :
: . : ;
: : :
displayed
: ;
: ;
. . . . . . . . . . . . . . . . . . . . . . . .._
: . . . . . . . . _
Description
7. Press the m button. " 12:OO AM" will be
Entry of the current day, date and time.
displayed.
Programming
1.
Dial(OO).
" Day/Time Set" will be displayed.
2. Press the NEXT button.
" ' 88 Jan.1 FRI" will be displayed and " ' 88"
will blink.
3. Enter the year (last 2 digits) using the dialing
button.
5.
6.
4. Press the m button and then repeat
pressing the SELECT button until the desired
month is displayed.
Press the a button and then enter the day
with 1 or 2 digits.
Press the m button and then repeat
pressing the SELECT button until the desired
day of the week is displayed.
3-4
8. Enter the hour with 1 or 2 digits.
9. Press the m button and then enter the
minute with 2 digits.
10. Press the m button and then repeat
pressing the SELECT button until the desired
AM/PM is displayed.
11.
Press the MEMORY button.
12. To return to the initial program mode, press
the END button.
Condition
l
If m button ispressed, the display will
return to the previous sequence in the
programming step.
0 Instantly after pressing the MEMORY button,
the. new time will start.
However, the LCD of extension connected to
jack number 01 will display the new time only
after the System Program Switch is set to
' SET" .