Co Line (Col) - Panasonic KX-T336 Installation Instructions Manual

18.00 CO Line (COL)

Description
To assign parameters on a CO line basis. DATA ERROR
appears on the entry of parameters if no trunk card is
assigned in the Slot Assignment (SLA) programming.
(Password level : Three or higher)
Input Format
Index Number
Four digit numbers (1011 to 3158)
em
Assigning Items
lumber
0 1 Trunk Group
0 2 Trunk Name
0 3 Direct Termination
0 4 Night Answer Point
(Type : No.)
0 5 Dial Mode
0 6 DTMF Duration Time
Pulse Speed
0 7
Technical Manuals Online! - http://www.tech-man.com
index Number
01 to 16 : trunk group number
Maximum ten digits consisting of letters, numbers and marks
(Enclose the name with double quotes
DN XXXX (XXXX : three or four digits) : extension number
0 : none
(Not assignable when the Trunk Group type is DID, PVL or TIE,
or Incoming Mode (Day) is set to any mode except DIL
DN XXXX (XXXX : three or four digits) : extension number
U2: universal night answer 2
0 : none
N : Night Answer Group Extensions
(Not assignable in case of DID, TIE, or PVL, or outgoing only)
1 : DTMF mode
2 : Pulse mode
3 : MFC-R2 mode
1 : 80ms
2 : 160ms
(Not assignable when the dial type is pulse)
1 : low (10 pps)
2 : high (20 pps)
(Not assignable when the dial type is DTMF)
Explanation
Physical number of the CO line
Input Value
10-c-34
(70695)
Continued