Routing Table Override; Tie Line Routina Table In Pbx-1 - Panasonic KX-T336 Installation Instructions Manual

Routing Procedure 1: Routing Table
Technical Manuals Online! - http://www.tech-man.com
Provides for the routing of calls over the TIE Line Network.
Up to 36 routing patterns can be programmed in this table.
This table is referenced by the system to identify the trunk route, when an
extension user made a TIE call by dialing the feature number for
Access," or Other PBX extension number. A routing pattern appropriate for
each call is decided by the first one, two or three digits (except TIE trunk access
code) of the dialed number.

. Routing Table Override

If a TIE call is made by pressing a CO key or dialing Trunk Group Access
Number, this table is not referenced by the system and the call is routed over
the specified TIE trunk directly.
{Programming Example)
A Network of TIE Lines
PBX Code 950

TIE Line Routina Table in PBX-1

Code Delete
Digit
0
951
When "84' (TIE Trunk Access Code)+951+100"
the routing pattern for this call is decided by "961.'
Then the call is routed over TGlO (Trunk Group 10 whose type is "TIE").
3-F-68
(70695)
PBX-2
PBX Code 951
Trunk Group Hunt Sequence
Insert
T O 2 1
Dial
is dialed by an extension user,
1