Message Waiting Lamp Off-Control-Voice Mail; Ringback Tone While Transfer - Panasonic KX-T336 Installation Instructions Manual

(10) Message Waiting Lamp Off-Control - Voice Mail
Used to determine whether the system turns off the Message Waiting lamp
or the VPS does when the VPS answers the callback from the message
receiver.
(Parameters)
1. Normal Mode
The system turns off the Message Waiting lamp. (default)
2. Voice Mail Mode 1
Only the VPS port that turned on the Message Waiting lamp can turn it
Off.
3. Voice Mail Mode 2
Any VPS port can turn off the Message Waiting lamp.
(11) p -law-A-law (E-l only) - (Not available in your area.)
(12) SLT Transfer Operation
If set to 'Mode Z, the following operations become available with the SLT
users.
Screened Call Transfer to Trunk (Section 5-D-l -06)
l
Call Transfer by using the feature number for "Transfer." (Section 5-D-l
l
through 1.05)
Establishing a conference call by dialing the feature number for
l
'Conference." (Section 5-E-1 .OO)
(Parameters)
1: Mode 1 (default)
2: Mode 2

(13) Ringback Tone While Transfer

Used to select the type of sound source during an unscreened call transfer
to an extension.
By default, the caller hears Music on Hold (if provided) while the caller is
being transferred to another letion. However, if no music source is
provided with the system, the caller hears no sound. In this case, we
recommend changing the setting to
(Parameters)
Y : Ringback Tone
N : Music on Hold (default)
Input Format
Index Number
None
Technical Manuals Online! - http://www.tech-man.com
Tone)."
1 o-c-82-2