Configuration
Assigns the data concerning cards, slots, T-l
channels and
For further details, refer to Section 9-C
"Configuration
System
Assigns the elemental data common to the whole
system.
For further details, refer to Section 9-O 'System
Screen."
Group
Assigns the data for trunk groups, ICM paging
groups and pickup groups.
For further details, refer to Section 9-E "Group
Screen."
Trunk
Assigns various parameters for CO lines, external
pagers and music sources or tenant number for
AGC (Automatic Gain Control).
Refer to Section 9-F Trunk Screen."
Extension
Assigns the parameters for each extension, DSS
consoles, Doorphones and Attendant consoles.
Refer to Section 9-G "Extension Screen."
Special Carrier Access
Assigns available trunk groups and parameters
necessary for making Equal Access or OCC
(Other Common Carrier) Access calls.
Refer to Section 9-H Special Carrier Access
Screen."
Toll Restriction
Assigns parameters for Toll Restrictiin.
Refer to Section 9-i roll Restriction Screen."
Automatic Route Selection
Assigns the parameters for Automatic Route
Selection.
Refer to Section 9-J "Automatic Route Selection
Screen."
Special Attended
Assigns parameters for DISA (Direct Inward
System Access), DID (Direct Inward Dialing),
UCD (Uniform Call Distribution) and TIE Line
Routing Table.
Refer to Section 9-K "Special Attended Screen."
Technical Manuals Online! - http://www.tech-man.com
Screen."
Miscellaneous
Assigns the installation information and cards for
effectuating Power Failure Transfer.
Refer to Section 9-L "Miscellaneous Screen."
7-c-s