Error Message Tables; Error Messages Related To The Assigning Items In The Same Command - Panasonic KX-T336 Installation Instructions Manual

D. Error Message Tables
1.00 Error Messages Related to
the Assigning Items in the
Same Command
If there is a wrong entry in the displayed screen,
the following appears on the message line when
storing the entry: "DATA ERROR (XXX)."
DATA
ERROR No.
101
102
110
130
140
.
141
'150
160
190
Technical Manuals Online! - http://www.tech-man.com
Probable Cause
(page length)-(skip length) < 6
(receive digit) 2 (delete digit) is not established
in - Special Attended DID screen.
Restriction Level-Operator s Restriction Level-
International is not established in - Operation
screen
Day-night combination in the incoming mode is
not correct.
Combination of the terminals of operators I,2
is incorrect.
DN is not installed.
Attempting to assign FDN's of UCD # 1 to # 4
for the overflow destination of UCD # 5 to # 32
Attempting to assign its own extension number
on the key which cannot be assigned to its own
extension number.
SDN
Specifying UCD number incorrectly.
Date value is incorrect on the check of month,
and leap year in the time and date setting
The (XXX) indicates one of the error message
numbers shown below and possible causes of the
errors and countermeasures for them are as
follows.
Make (page length)-(skip length) Z 6.
Make (receive digit) 2 (delete digit).
Make Restriction Level-Operation 6
Restriction Level-International
Change the day-night combination in
incoming mode.
Change the combination of terminals for
operators 1.2.
Designate the installed DN.
Set FDN of other UCD. or extension director]
number.
Specify the number except its own extension
number.
Assign UCD to only one ICM.
Check the date setting.
lo-D-1
Countermeasure