Single Co, Group Co Setting; Conditions Of Assigning Dn Buttons; Conditions Of Setting "Incoming Mode (Day)"; Conditions Of Setting "Type" - Panasonic KX-T336 Installation Instructions Manual

(2) Conditions for setting trunk groups
If a trunk group changes "Group-Trunk Group", Type assigned to "PVL" (Private
Line) to another type and if any CO lines belonging to the trunk group are
selected to be "PRV-CO" (Private CO) in "Extension-Station, Type/Number,
those CO lines are canceled from "Extension-Station", Type/Number automati-
cally.

2. Single CO, Group CO setting

If "Single CO" or "Group CO" is selected in 'Extension-Station", Type,

(1)' Conditions of assigning DN buttons

The designated CO line is assigned to a trunk group in
l
Trunk Group.
The trunk group should have "Group-Trunk Group", Type assigned to other
than 'PVL" or "DID."
(2) Conditions of setting 'Incoming Mode (Day)
1) If "Incoming Mode (Day)" is changed from
The trunk group changed to another mode in "Group-Trunk Group", incoming
Mode (Day) is assigned in "Trunk-CO Line", Trunk Group. The
Line", Direct Termination setting is canceled.
2) If 'Incoming Mode (Day)" is changed from 'DIL 1
"Group-Trunk Group", Destination (DIL 1: N only) setting is canceled.

(3) Conditions of setting "Type"

Changing "Type" to 'PVL" (Private Line) from any other modes cancels
CO" or 'Group CO" assigned to a DN button of an extension belonging to this
trunk group in 'Extension-Station", Type.
It is impossible to change from 'DID" or "TIF to any other modes and vice versa
if any CO line in "Trunk-CO Line" belongs to the "Group-Trunk Group."
Technical Manuals Online! - http://www.tech-man.com
9-E-6
(70695)