Conference; Establishing A Conference-1 (Slt Transfer Operation Is In Mode 1); Establishing A Conference-2 (Slt Transfer Operation Is In Mode 2) - Panasonic KX-T336 Installation Instructions Manual

E. Conversation Features
1 .OO Conference
Description
Allows an extension user to add a third-party to a
two-party conversation and make a three-party

conference.

An extension user can have the following
combination of calls on the line:
three extensions
l
one extension and two outside parties
l
two extensions and one outside party
l
On the TSW card, there are eight standard
conference trunks provided for this purpose.
By equipping the optional conference expansion
card (KX-T336104),
trunks increases to 64.
To utilize optional conference expansion card,
assign 'Configuration-System
Additional CONF to 'Yes."
When two members in the conference are both
outside parties, two conference trunks are
necessary. In all other cases, one conference
trunk is enough.
Programming
System Programming
"Configuration-System Assignmenr.
TSW Additional CONF
"System-Numbering Plan (1 l/l 1)"
Conference
World Select 3 (WS)
SLT Transfer Operation
Conditions
Pressing the switchhook by the conference
originator during the conference restores a
conversation with the first party.
This places the second party on Consultation
Hold.
Pressing the switchhook again establishes the
conference again if the conference trunk is
available. If the conference trunk is not available,
conversation with the held (second) party starts,
placing the first party on Consultation Hold.
Technical Manuals Online! - http://www.tech-man.com
the number of conference
Assignment", TSW
Reference
1 o-c-1 .oo
9-C-l
9 - D - 6 . 1 1 1 o-c-1 0.00
10-c-53.00
Operation
Establishing a conference - 1 (Default mode)
(SLT Transfer Operation is in Mode 1)
While having a two-party conversation;
1. Press the switchhook for
approximately one half second
and release it.
The other party is placed on
l
Consultation
You hear confirmation tone 2
l
and then dial tone 1 or 3 or 4.
2. Dial the phone number of the
third party.
3. Press the switchhook for
approximately one half second-
and release after the third party
answers.
You hear confirmation tone 3. .
l
A three-party conference is
l
n o w
Establishing a conference - 2
(SLT Transfer Operation is in Mode 2)
While having a two-party conversation;
1. Press the switchhook for
approximately one half second
and release it.
The other party is placed on
l
Consultation Hold.
You hear confirmation tone 2
l
and then a dial tone 1 or 3 or 4.
2. Dial the feature number for
conference
You hear confirmation tone 1
l
and then a dial tone.
3. Dial the phone number of the
third party.
5-E-l
(70695)
Hold.
e s t a b l i s h e d .
(default).