4. Press the switchhook for
Note:
If the conference trunk is not available in step 3,
. you cannot establish conference by pressing the
switchhook, which puts the third party on
Consultation Hold, and conversation with the
held party starts.
Concluding a conference
Talking to the original party while holding the third
I
Technical Manuals Online! - http://www.tech-man.com
approximately one half second
and release it after the third party
answers.
You hear confirmation tone 3.
l
A three-party conference is
l
now
established.
1. Replace the handset.
.
The other two parties may
continue their conversation.
.
If the other two parties are both
outside parties, they will be
disconnected.
1. Press the switchhook for
approximately one half second
and release it.
You hear confirmation tone.
l
You can talk to the original
l
5-E-l -1
(70695)