Hdd Board - Packard Bell EasyNote SJ Disassembly Manual

1414141414
4. Disconnect the button board flat cable (see
5. Remove the 7 screws securing the cover.
6. Turn the notebook upside down.
7. Remove the 13 screws (all M2.5x6).
8. Turn the notebook upside down and remove the top cover.

HDD Board

The HDD board contains the two Serial ATA connectors. To remove the HDD board, first
remove the top cover (see
Fig. 22 Location of top cover screws.
Fig. 23 Location of top cover screws underside.
Top Cover), and then perform the following steps:
Packard Bell EasyNote SJ Disassembly Manual
Fig. 17).
14