Memory - Packard Bell EasyNote SJ Disassembly Manual

66666
Note: If the system ships with 2 hard drives, they will be configured as 2 separate drives and not in any type of
RAID configuration.

Memory

To remove the memory installed, first remove the battery (see Battery) and then perform the
following steps:
Remove the 7 screws retaining the memory/CPU/WLAN cover and remove the cover.
1.
Release the metal clips securing the memory module; the module will eject upwards.
2.
Carefully remove the module.
Note: In case two memory modules are installed, you always have to remove the top module first before you
can remove the second one.
Fig. 5 Removing memory/CPU/WLAN cover.
Fig. 6 Removing memory module.
Packard Bell EasyNote SJ Disassembly Manual
6