Table of Contents
Advertisement
1717171717
2. Remove the 2 screws securing the subwoofer and lift it out (see
Note: The subwoofer is optional.
Touchpad Button Board
The touchpad button board is located on the top cover. To remove it, first remove the top cover
(see
Top
Cover), and then perform the following steps:
1. Release the clip securing the flat cable (the clip folds up) and disconnect the flat cable
from the touchpad.
2.
Remove the 2 screws securing the touchpad button board and lift out the board
including the cable (see
Note: The touchpad is part of the top cover and it cannot be exchanged separately. You cannot remove the flat
cable from the touchpad button board.
Standby Switch
The standby switch works as a soft power switch when the lid is closed; it is located in the top
cover. To remove the standby switch, first remove the top cover (see
perform the following steps:
1. Remove the screw securing the standby switch.
Fig. 28 Removing touchpad button board and cable.
Fig.
28).
Packard Bell EasyNote SJ Disassembly Manual
Fig.
27-B).
Top
Cover), and then
17
Advertisement
Table of Contents
