Inverter; Webcam - Packard Bell iPower GX Disassembly Manual

Inverter

You can complete this procedure with the LCD assembly connected to the notebook. To remove
the inverter, first remove the LCD bezel (see LCD Bezel on page 17), and then do the following:
1. Remove the screws securing the inverter board.
2. Lift the inverter from the LCD panel and turn it over.
3. Disconnect the cables from the headers on the inverter board.

Webcam

You can complete this procedure with the LCD assembly connected to the notebook. To remove
the webcam, first remove the LCD bezel (see LCD Bezel on page 17), and then do the following:
1. Disconnect the cable from the header on the webcam module.
2. Remove the screws that secure the webcam.
Fig. 37 Location of the inverter screws.
Fig. 38 Removing the inverter.
Fig. 39 Disconnecting the inverter cables.
Fig. 40 Location of the webcam connector.
Fig. 41 Location of the webcam module screws.
Packard Bell iPower GX Disassembly Manual
18