2828282828
5. Disconnect the LCD cable.
6. Remove the side brackets (four screws on each side).
Webcam/Microphone
To remove the webcam and microphone, first remove the LCD panel (see
and then do the following:
1. Disconnect the cable from the header on the module.
2. Carefully remove any adhesive tape securing the module (see
3. Extract the webcam/microphone module.
Fig. 46 Location of LCD cable connector.
Fig. 47 Location of webcam connector.
Packard Bell EasyNote ST Disassembly Manual
LCD Panel
on page 27),
Fig. 47
on page 28).
28