Displaying Override Status - Trane TRACER SUMMIT BMTX-SVU01B-EN Daily Operations

Display Override
Status checkbox
BMTX-SVU01B-EN
Changing System Values (Overrides and Setpoints)
The Override button for UCMs is active if the BCU is up and communi-
cating with the UCM and your workstation, and if the UCM is not under
local control. The Override button for an area object is active if the BCU
that the area object is saved in is communicating to your workstation.
Note:
The text of the button that displays the Override dialog box is
specific to your site. The button may, for example, be called
Override, Control, or another name.

Displaying Override Status

You can enable the "hand" icon to display on an override button when the
object is in manual override by doing the following:
1. Click on Tools from the menu bar, then select Options. The Systems
Options screen displays.
2. In the Systems Options screen, check the Display Override Status box
(see Figure 48).
3. Click Save.
Figure 48. Systems Options Screen
57