Trane TRACER SUMMIT BMTX-SVU01B-EN Daily Operations page 229

BMTX-SVU01B-EN
5. Make a selection:
To rotate sequence numbers automatically, click Rotate to cause a
•
normal rotation of all the chillers.
To rotate sequence numbers manually, click the sequence number
•
of the chiller to be rotated. Then click the New Sequence Number
arrows until the desired sequence appears in the New Sequence
column.
6. Click Save.
7. Click Close to return to the Chillers screen.
Note:
If you change the sequence numbers without saving them and
press the Close button, a warning message displays (see
Figure 54). Click Yes to save the sequence numbers.
Figure 54. Sequence Numbers Save Warning
Forcing the Chiller Sequence to be Rotated
217