Trane TRACER SUMMIT BMTX-SVU01B-EN Daily Operations page 23

BMTX-SVU01B-EN
Using the Tutorial within Tracer Summit Software
Figure 7. Tutorial Task-based Menu
Note:
When the tutorial menu is accessed from the Tracer Summit
software, it shows only training modules for a specific task. To
access the complete tutorial, refer to "Using the Tutorial as a
Stand-alone Training Course" on page 21.
2. Click on a training module to start the tutorial. Figure 8 on page 12
shows an example of a Tracer Summit tutorial screen.
3. Work through the examples by following the instructions.
4. To return to the Tracer Summit software, click the Quit button at the
bottom of the tutorial screen.
11