Trane TRACER SUMMIT BMTX-SVU01B-EN Daily Operations page 222

Changing Chiller Plant Status Information
210
Figure 44. Chiller Plant Control Status Chillers Screen
3. Click the name of the chiller to be reset.
4. Click Reset Chiller Failure (this button is available only if the high-
lighted chiller is marked failed). A warning message displays (see
Figure 45).
Figure 45. Chiller Failure Reset Warning
5. Click Yes to re-insert the failed chiller into the sequence. The Chiller
Plant Control Status Chillers screen displays again.
IMPORTANT
This procedure will not reset any diagnostics at the chiller. It will return
only the chillers to the sequence.
BMTX-SVU01B-EN