BMTX-SVU01B-EN
5. In the Report Name field, select the report that you want to run.
6. Click OK. If you are using a BCU panel, a selection window displays
for the object, application, or equipment you selected (see Figure 136).
If you are using Tracer 100, the report will begin to print (see
Figure 137).
Figure 136. Select Window
Step 8
7. Select the instance (object, application, or equipment) for the report.
8. Click OK. The report displays in the Report Viewer (see Figure 137).
Figure 137. Standard Live Report in Report Viewer
Running a Standard Live Report
Step 7
147