Table of Contents
Advertisement
Click the link of RADIUS Server to access into the following page for more settings.
Available settings are explained as follows:
Item
IP Address
Port
Shared Secret
Session Timeout
3
.
7
.
4
A
c
c
e
s
s
C
o
n
3
.
7
.
4
A
c
c
e
s
s
C
o
n
For additional security of wireless access, the Access Control facility allows you to restrict
the network access right by controlling the wireless LAN MAC address of client. Only the
valid MAC address that has been configured can access the wireless LAN interface. By
clicking the Access Control, a new web page will appear, as depicted below, so that you
could edit the clients' MAC addresses to control their access rights (deny or allow).
Description
Enter the IP address of RADIUS server.
The UDP port number that the RADIUS server is using.
The default value is 1812, based on RFC 2138.
The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
Set the maximum time of service provided before
re-authentication. Set to zero to perform another
authentication immediately after the first authentication has
successfully completed. (The unit is second.)
t
r
o
l
t
r
o
l
90
VigorFly 210 Series User's Guide
Advertisement
Table of Contents
