Table of Contents
Advertisement
P
P
P
o
E
P
P
P
o
E
PPPoE stands for Point-to-Point Protocol over Ethernet. It relies on two widely accepted
standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a
common broadband medium, such as a single DSL line, wireless device or cable modem. All
the users over the Ethernet can share a common connection.
PPPoE is used for most of DSL modem users. All local users can share one PPPoE connection
for accessing the Internet. Your service provider will provide you information about user name,
password, and authentication mode.
If your ISP provides you the PPPoE connection, please select PPPoE for this router. The
following page will be shown:
Available parameters are listed below:
Item
User Name
Password
Confirmed Password
Redial Policy
VigorFly 210 Series User's Guide
Description
Assign a specific valid user name provided by the ISP.
Assign a valid password provided by the ISP.
Type the password again for confirmation.
If you want to connect to Internet all the time, you can
choose Always On. Otherwise, choose Connect on
Demand.
Always On – Choose it to enable router always keep
connection.
Connect On Demand - If the connection has been idled
over the value, the router will drop the connection.
Idle Time - Set the timeout for breaking down the Internet
after passing through the time without any action. The unit is
17
Advertisement
Table of Contents
