Table of Contents
Advertisement
Y
o
t
a
/
O
Y
o
t
a
/
O
If your router connects to a Yota/One USB modem and you want to access Internet via
Yota/One USB modem, choose Yota/One USB as connection type and type the required
information in this web page.
Available parameters are listed below:
Item
Keep WAN Connection
MTU
WAN Connection
Detection
After finishing all the settings here, please click OK to activate them.
VigorFly 210 Series User's Guide
n
e
U
S
B
M
o
d
e
m
f
o
n
e
U
S
B
M
o
d
e
m
f
o
r
W
A
N
1
r
W
A
N
1
Description
Normally, this function is designed for Dynamic IP
environments because some ISPs will drop connections if
there is no traffic within certain periods of time. Check
Enable PING to keep alive box to activate this function.
PING to the IP - If you enable the PING function, please
specify the IP address for the system to PING it for keeping
alive.
PING Interval - Enter the interval for the system to execute
the PING operation.
It means Max Transmit Unit for packet. The default
setting is 1360.
Such function allows you to verify whether network
connection is alive or not through Ping Detect.
Mode – Choose None or Ping Detect for the system to
execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference.
TTL value is set by telnet command.
45
Advertisement
Table of Contents
