Table of Contents
Advertisement
Item
MTU
Keep WAN Connection
WAN Connection
Detection
After finishing all the settings here, please click OK to activate them.
Description
SIM PIN code – Type PIN code of the SIM card that will be
used to access Internet. Such item is required for LTE USB
Modem.
Network Mode – Force Vigor router to connect Internet with
the mode specified here. If you choose 4G/3G/2G as network
mode, the router will choose a suitable one according to the
actual wireless signal automatically.
APN Name - APN means Access Point Name which is
provided and required by some ISPs. Such item is required for
LTE USB Modem.
It means Max Transmit Unit for packet. The default
setting is 1360.
Normally, this function is designed for Dynamic IP
environments because some ISPs will drop connections if
there is no traffic within certain periods of time. Check
Enable PING to keep alive box to activate this function.
PING to the IP - If you enable the PING function, please
specify the IP address for the system to PING it for keeping
alive.
PING Interval - Enter the interval for the system to execute
the PING operation.
Such function allows you to verify whether network
connection is alive or not through Ping Detect.
Mode – Choose None or Ping Detect for the system to
execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference.
TTL value is set by telnet command.
44
VigorFly 210 Series User's Guide
Advertisement
Table of Contents
