Table of Contents
Advertisement
Item
Keep WAN Connection
MTU
WAN Connection
Detection
WAN Physical Type
MAC Address Clone
After finishing all the settings here, please click OK to activate them.
VigorFly 210 Series User's Guide
Description
address here because your ISP should provide you with
usually more than one DNS Server. If your ISP does not
provide it, the router will automatically apply default DNS
Server IP address: 198.95.1.1 to this field.
Secondary DNS Server - You can specify secondary DNS
server IP address here because your ISP often provides you
more than one DNS Server. If your ISP does not provide it,
the router will automatically apply default secondary DNS
Server IP address.
Normally, this function is designed for Dynamic IP
environments because some ISPs will drop connections if
there is no traffic within certain periods of time. Check
Enable PING to keep alive box to activate this function.
PING to the IP - If you enable the PING function, please
specify the IP address for the system to PING it for keeping
alive.
PING Interval - Enter the interval for the system to execute
the PING operation.
It means Max Transmit Unit for packet. The default
setting is 1442.
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping Detect.
Mode – Choose ARP Detect or Ping Detect for the system to
execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference.
TTL value is set by telnet command.
Specify the data transmitting rate for such mode.
MAC Address Clone is available when the box of Enable is
checked. The router will detect the MAC address
automatically. The result will be displayed in the field of
MAC Address.
37
Advertisement
Table of Contents
