Top Panel 1 - Fostex MR-8MKII Owner's Manual

MR-8mkII Owner's Manual (Names and functions)
16
15
14
13
12
11
10
1. [INPUT A] input connectors
Both the [BAL] XLR connector and [UNBAL/
GUITAR] phone jack are provided (if you
connect sources to both the XLR connector
and PHONE jack, the phone input jack pri-
ority). You can connect a guitar, microphone,
keyboard, etc. (a guitar should be connected
to the PHONE jack). To use either of the [IN-
PUT A] connectors, set the [INPUT A SELECT]
switch to "MIC/LINE" or "GUITAR" (you can-
not use it when the [INPUT A SELECT] switch
is set to "INT MIC").
To record a mono source, use only the [IN-
PUT A] section. To record a stereo source,
use both the [INPUT A] and [INPUT B] sec-
tions (see page 36).
2. [INPUT B] input connectors
Both the [BAL] XLR connector and [UNBAL]
phone jack are provided (if you connect
sources to both the XLR connector and
PHONE jack, the phone input jack priority)..
You can connect a microphone, keyboard,
etc. This section is used only when record-
ing a stereo source. When recording a mono
source, this section is not used (see page 36).

Top panel 1

2
1
INPUT A SELECT
INPUT A INPUT B
UNBAL
UNBAL
/GUITAR
BAL BAL
GUITAR
TRIM PEAK DISTORTION TRIM
PEAK
LINE MIC MIN MAX LINE MIC
DYNAMIC CONDENSER TUBE MIC SIMULATION
MIC INPUT A
BRIT STACK US METAL 60'S COMBO AMP SIMULATION
EFFECT SEND
0 10 0 10 0 10 0 10
PAN
L R L R L R L R
1 2 3 4 5/6
MAX
MIN
9
(XLR and phone)
(XLR and phone)
26
3 4 5 6
ST OUT
L R
PHONES
1 2
PHONES VOL
MIN MAX
EFFECT
REVERB/DELAY TIME
MIN MAX
ROOM HALL
RHYTHM TIME BASE
CONTRAST
PLATE DELAY GUIDE SELECT
1-4 5/6 NEW STEREO
1-8 7/8
1-6 7/8
SONG WAV FILE
REC SELECT
BOUNCE
ABC1 DEF2 GHI3
7/8 MASTER
MAX
POWERFUL NATURAL BRIGHT
MASTERING
JKL4 MNO5
LOCATE
AUTO PUNCH PLAY MODE
A / IN
MIN
PQR6 STU7 VWX8
RECORD STOP PLAY
LOCATE REC END
LOCATE ABS ZERO
A-B PLAY
8
3. [STEREO OUT] jacks (L, R)
These jacks output the stereo (L and R) buss
signals. Connect these jacks to the monitor-
ing equipment or master recorder (see page
44).
4. [PHONES] jacks (1, 2)
Two jacks (1 and 2) are provided. You can
use two pairs of stereo headphones with the
MR-8mkII (see page 36).
5. [PHONES VOL] control
Adjusts the headphone output level.
6. [REVERB/DELAY TIME] control
This control adjusts the reverb time or de-
lay time. When you select "ROOM", "HALL"
or "PLATE" for the effect type, it adjusts the
reverb time.When you select "DELAY", it
adjusts the delay time (See page 62).
7. [EFFECT] keys
These keys are used to select the effect type.
You can select from three reverb types
(ROOM, HALL and PLATE) and a delay
(DELAY). The selected key is lit (see page 61).
8. [MASTER] fader
Adjusts the stereo (L and R) buss output
level.
7
MENU/ENTER
STORE UNDO/REDO
B / OUT
YZ9 +-_0 DELETE
REWIND F FWD