Initializing The Mr-8Mkii - Fostex MR-8MKII Owner's Manual

MR-8mkII Owner's Manual (Other functions)
By initializing the MR-8mkII, you can initialize all global menu settings common to all songs, as
well as the time base and display contrast level.
Pre-roll time setting
Post-roll time setting
Delay type setting
MIDI sync out setting
MTC frame rate setting
Beat resolution mode setting
Peak hold time setting
Auto Delete On/Off setting
Time base (shown when turning on the power)
Display contrast level
Card Protect On/Off setting
Phantom Power On/Off setting
Rhythm Guide settings
1) While the recorder is stopped, press the
[MENU/ENTER] key to enter the menu mode.
The display now shows the first page of the
menu selection screen, where "<< Back" is
highlighted initially.
2) Rotate the JOG dial to select "System", and press
the [MENU/ENTER] key.
The display now shows the first page of the
system menu screen, where "<< Back" is
highlighted initially.

Initializing the MR-8mkII

Initialized item
138
Default setting
4 seconds
1 second
L-R (stereo) delay
Off
25 frames
Off
3 seconds
On
Bar/Beat
Factory present level
On
Off
Factory present setting
3) Rotate the JOG dial to select "Init.Memory" on
the second page, and press the [MENU/ENTER]
key.
The display now shows the confirmation screen
for initializing.
4) Press the [MENU/ENTER] key while holding
down the [RECORD] key.
The settings are immediately initialized.
The initialize is confirmed and the display
returns to the previous screen.
To cancel the initialization, press the [STOP]
key.
5) Press the [STOP] key to exit the menu mode.
flashing