Editing The Part(S) - Fostex MR-8MKII Owner's Manual

You can erase the part(s) on the selected track(s) of the current song.
LOCATE A
point
ABS ZERO
TRK 1
TRK 2
TRK 3
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8
You cannot erase the part(s) of a song
<Note>:
which is protected. Release the song protection
before erasing the part(s).
<Note>: With the default setting, you cannot
undo or redo erasing part data. If you want to
make it possible to undo or redo erasing part
data, set the "Auto Delete" menu item of the
"System" menu in the MENU mode to "Off" (see
page 135).
1) Load the song you want to edit.
2) Set the LOCATE A and LOCATE B points (see
page 51).
You can check the part(s) by playing back the
recorder between the LOCATE A and LOCATE
B points (see page 46).
3) While the recorder is stopped, press the
[MENU/ENTER] key to enter the menu mode.
The display now shows the first page of the
menu selection screen, where "<< Back" is
highlighted initially.
4) Rotate the JOG dial to select "Part Edit >", and
press the [MENU/ENTER] key
The display now shows the part edit menu
screen, where "<< Back" is highlighted.
Erasing the part(s)
LOCATE B
point
REC END
Silent
MR-8mkII Owner's Manual (Part data editing)
5) Rotate the JOG dial to select "Erase Part >", and
press the [MENU/ENTER] key.
The display now shows the screen for
selecting a track or tracks of which you want
to erase the part(s). On the screen, "<< Back"
is initially highlighted.
As you can see from the message on the screen
("Can't Undo! Sure?"), you cannot undo
erasing part data.
6) Rotate the JOG dial to select "Erase Track = *",
and press the [MENU/ENTER] key.
The current option starts flashing and you can
now select the desired track(s) by rotating the
JOG dial. The available options are:
• 1 through 8 (mono track)
• 1/2, 3/4, 5/6 and 7/8 (stereo tracks)
7) Rotate the JOG dial to select the desired option,
and press the [MENU/ENTER] key.
The display returns to the previous screen.
105
flashing