Actual Track Bouncing - Fostex MR-8MKII Owner's Manual

After finishing rehearsal, let's carry out actual track bouncing.
1) While the recorder is stopped, press the
[1-8 > NEW SONG] key.
The [1-8 > NEW SONG] key lights up and the
display shows the screen below.
If you execute track bouncing, press the
[MENU/ENTER] key while holding down the
[RECORD] key. If you cancel track bouncing,
press the [STOP] key.
2) Press the [MENU/ENTER] key while holding
down the [RECORD] key.
Track bouncing starts. The mixed (bounced)
signals are recorded to tracks 7/8 of a new
song. The screen example below shows that
tracks 1 through 8 of Song02 (whose name is
"Moonlit") is now being bounced to tracks 7/8
of the new song (Song04). Meters 1 through 8
show the playback levels of tracks 1 through
8, while the L and R meters shows the
recording levels of tracks 7/8 of Song04.
<Note>: To cancel track bouncing in the
middle, press the [STOP] key. Pressing the
[STOP] key automatically deletes the new
song created in step 2 above and turns off
the bounce mode.

Actual track bouncing

INPUT A SELECT
INPUT A INPUT B ST OUT
L
PHONES
1
UNBAL UNBAL
/GUITAR
BAL BAL
GUITAR
TRIM PEAK DISTORTION TRIM PHONES VOL
PEAK
MIN
LINE MIC MIN MAX LINE MIC
DYNAMIC CONDENSER TUBE MIC SIMULATION
EFFECT
REVERB/DELAY TIME
MIC INPUT A
BRIT STACK US METAL 60'S COMBO AMP SIMULATION
MIN
ROOM
EFFECT SEND
0 10 0 10 0 10 0 10
PLATE
PAN
L R L R L R L R
1 2 3 4 5/6 7/8
MAX
MIN
flashing
MR-8mkII Owner's Manual (Track bouncing)
R
2
MAX
MAX
HALL
RHYTHM TIME BASE
CONTRAST
DELAY
GUIDE SELECT
1-4 5/6 NEW STEREO
1-8 7/8
1-6 7/8
SONG WAV FILE
REC SELECT
BOUNCE
ABC1 DEF2 GHI3
MASTER
MAX
POWERFUL NATURAL BRIGHT
MASTERING
JKL4 MNO5
LOCATE
AUTO PUNCH PLAY MODE STORE
A / IN B / OUT
MIN
PQR6 STU7 VWX8 YZ9 +-_0
RECORD STOP PLAY REWIND
LOCATE REC END
LOCATE ABS ZERO
A-B PLAY
When you are going to execute track
<Note>:
bouncing, if there is not enough space on
the CompactFlash
ready exist on the disk, a warning message
appears and the operation is canceled.
When track bouncing to a new song completes,
the recorder automatically stops and the dis-
play shows the home screen of the new song.
The song name of the new song is given by the
name of the original song with "-**" (** is a
two-digit number).
You can check the result by following the pro-
cedure described in "Checking the bounced
signals on tracks 7/8" on page 71.
<Exporting bounced data to a PC>
Song data bounced to tracks 7/8 of the new song
can be exported to a PC. You can use the exported
data as a source when burning an original audio
CD using a CD-RW drive, or use it with a computer's
music software (see page 115).
<Chips>: By connecting an external CD-R/RW
drive to the [USB HOST] connector, you can
burn bounced song data on tracks 7/8 to a CD-
R/RW disc for making your original audio CD
(see page 123).
73
1
MENU/ENTER
2
UNDO/REDO
DELETE
F FWD
2
TM Card or 99 songs al-