Using The Insert Effects; Mic Simulation Effects; Amp Simulation Effects - Fostex MR-8MKII Owner's Manual

Digital multitracker
Hide thumbs Also See for MR-8MKII:
Table of Contents

Advertisement

MR-8mkII Owner's Manual (Using effects)
The [INPUT A] channel of the MR-8mkII provides two types of insert effects: microphone and
amplifier simulation effects. These effects can be used during recording.
These effects simulate popular microphones and guitar amplifiers. If you use the microphone
simulation effect when you record an acoustic guitar through your microphone, you can make
recording as if you are using a famous microphone. If you use the guitar amplifier simulation
effect when you record an electric guitar directly connected to the MR-8mkII, you can make
recording as if you are using a famous guitar amplifier.
Note that you cannot get exactly the same sound as the original microphone/guitar amplifier by
using simulation effects.
You can use mic simulation effects when the [INPUT A SELECT] switch on the rear panel is set to
"MIC/LINE".
MIC/LINE
INT MIC
GUITAR
INPUT A SELECT
By pressing the appropriate key, you can
choose from among three mic simulation ef-
fects: DYNAMIC, CONDENSER and TUBE (the
indicator of the key lights up).
When you use the internal microphone
<Note>:
by setting the [INPUT A SELECT] switch to the "INT
MIC" position, the insert effects are not available.
You can use mic simulation effects when the [INPUT A SELECT] switch on the rear panel is set to
"GUITAR". When the switch is set to "GUITAR", you can also use the distortion (adjusted by the
[DISTORTION] control), as well as the insert effects.
MIC/LINE
INT MIC
GUITAR
INPUT A SELECT
You can choose from three guitar amp simu-
lation effects: BRIT STACK, US METAL and 60's
COMBO (the selected key lights up).

Using the insert effects

Mic simulation effects

Set to the "MIC/LINE"
position

Amp simulation effects

Set to the "GUITAR"
position
60
DYNAMIC
MIC
BRIT STACK
"CONDENSER"
"DYNAMIC"
• Details of each mic simulation effect
Simulates the sound of a popular dy-
DYNAMIC
namic microphone.
Simulates the sound of a popular con-
CONDENSER
denser microphone for professional use.
Simulates the sound of a popular tube
TUBE
microphone for professional use.
"BRIT STACK"
DYNAMIC
MIC
BRIT STACK
• Amp simulation effects details
Simulates a popular British 800-series
BRIT STACK
tube guitar amp head.
Simulates a popular US high gain metal
US METAL
guitar amplifier.
Simulates a popular tube combo guitar
60's COMBO
amplifier.
CONDENSER
TUBE
MIC SIMULATION
INPUT A
US METAL
60'S COMBO
AMP SIMULATION
"TUBE"
"60"s COMBO"
"US METAL"
CONDENSER
TUBE
MIC SIMULATION
INPUT A
US METAL
60'S COMBO
AMP SIMULATION

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mr8 mk2

Table of Contents