Bouncing Tracks 1 Through 6 To Tracks 7/8; Rehearsal Of Track Bouncing - Fostex MR-8MKII Owner's Manual

MR-8mkII Owner's Manual (Track bouncing)

Bouncing tracks 1 through 6 to tracks 7/8

You can bounce tracks 1 through 6 to tracks 7/8.
As described earlier in "Bouncing tracks 1 through 4 to tracks 5/6", you can rehearse track
bouncing as many times as you like before executing actual track bouncing.
Before executing track bouncing, you can rehearse it. While rehearsing track bouncing, you can
control the playback level, panning and reverb (or delay) send setting of each source track, as
well as apply the mastering effect to the mixed L/R signals. We recommend to make rehearsal
thoroughly until you are satisfied with the sound.
The following assumes that the song you are going to execute track bouncing is loaded.
4
4
1) Use the [1-4 > 5/6, 1-6 > 7/8] key to select the
"1-6 > 7/8" bounce mode.
Selecting this bounce mode automatically arms
tracks 7/8 and changes the monitoring mode
for these tracks to input monitoring mode.
The display looks like this:
Lighting
Flashing
2) Raise the [5/6] fader and [MASTER] fader to the
" " position. Set all the other track faders
down to the minimum position.

Rehearsal of track bouncing

INPUT A SELECT
INPUT A INPUT B
UNBAL UNBAL
/GUITAR
BAL BAL
GUITAR
DISTORTION
TRIM PEAK TRIM
PEAK
LINE MIC MIN MAX LINE MIC
DYNAMIC CONDENSER TUBE MIC SIMULATION
MIC INPUT A
BRIT STACK US METAL 60'S COMBO AMP SIMULATION
EFFECT SEND
0 10 0 10 0 10 0 10
PAN
L R L R L R L R
1 2 3 4 5/6
MAX
MIN
2,4
Lighting
ST OUT
L R
PHONES
1 2
PHONES VOL
MIN MAX
EFFECT
REVERB/DELAY TIME
MIN MAX
ROOM HALL
RHYTHM TIME BASE
CONTRAST
PLATE DELAY
GUIDE SELECT
1-4 5/6
NEW STEREO
1-8 7/8
1-6 7/8
SONG WAV FILE
REC SELECT
BOUNCE
ABC1 DEF2 GHI3
7/8 MASTER
MAX
POWERFUL NATURAL BRIGHT
MASTERING
JKL4 MNO5
LOCATE
AUTO PUNCH PLAY MODE A / IN B / OUT
MIN
PQR6 STU7 VWX8
RECORD STOP PLAY
LOCATE REC END
LOCATE ABS ZERO
A-B PLAY
4
5
3
3) Press the [PLAY] key to start playback from the
beginning of the song.
4) While playing back the song, adjust playback levels
of tracks 1 through 6 using the track faders.
You can also adjust panning for tracks 1
through 4 and apply the reverb or delay to
these tracks, as well as apply the mastering
effect to the mixed sound.
During rehearsal and actual track bouncing,
the track faders and [MASTER] fader control
the following signals.
Faders
1 through 4
Fader 5/6
Fader 7/8
[MASTER]
fader
70
1
MENU/ENTER
4
STORE UNDO/REDO
YZ9 +-_0 DELETE
REWIND F FWD
Playback levels of tracks 1 through
4 for bouncing.
Playback levels of tracks 5/6 for
bouncing.
Monitor levels of tracks 7/8.
Recording master level of tracks 7/8.