Initializing The Mr-8Hd/Cd - Fostex MR-8CD Owner's Manual

MR-8HD/CD
Owner's Manual (Other functions)
By initializing the MR-8HD/CD, you can initialize all global menu settings common to all songs,
as well as the time base and display contrast level.
Pre-roll time setting
Post-roll time setting
Delay type setting
MIDI sync out setting
MTC frame rate setting
Beat resolution mode setting
Peak hold time setting
Time base (shown when turning on the power)
Display contrast level
1) While the recorder is stopped, press the
[MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the
menu selection screen, where "
highlighted initially (selecting "
to the previous screen).
2) Rotate the [MENU/ENTER] knob to select
"System ", and press the [MENU/ENTER] knob.
The display now shows the first page of the
system menu screen, where "
highlighted.
3) Rotate the [MENU/ENTER] knob to select
"Init Memory " on the second page, and press
the [MENU/ENTER] knob.
The display now shows the confirmation screen
for initializing.

Initializing the MR-8HD/CD

Initialized item
Back" is
Back" returns
Back" is
L-R (stereo) delay
Factory present level
4) Press the [MENU/ENTER] knob while holding
down the [RECORD] key.
The settings are immediately initialized.
The initialize is confirmed and the display
returns to the previous screen.
To cancel the initialization, press the [STOP]
key.
5) Press the [STOP] key to exit the menu mode.
130
Default setting
4 seconds
1 second
Off
25 frames
Off
3 seconds
Bar/Beat
Flashing