Initializing The Mr-8 - Fostex MR-8 Owner's Manual

By initializing the MR-8, you can initialize all global menu settings common to all songs, as
well as the time base and display contrast level.
1) While the recorder is stopped, press the [MENU]
key to enter the menu mode.
The MENU screen is shown in which "System" is
highlighted.
2) While "System" is highlighted, press the [ENTER]
key.
The display now shows the system menu screen in
which "Card Format" is highlighted initially.
3) Use the [CURSOR ] key to highlight "Init Memory",
then press the [ENTER] key.
The display now shows the confirmation screen for
initializing. in which "Yes->RECORD+YES key" and
"No->NO Key" alternatively flash.

Initializing the MR-8

Initialized item
Pre-roll time setting
Post-roll time setting
Delay type setting
MIDI sync out setting
MTC frame rate setting
Beat resolution mode setting
Click level setting
Time base (shown when turning on the power)
Display contrast level
Default setting
4 seconds
1 second
L-R (stereo) delay
Off
25 frames
Off
Off
Bar/Beat
Factory preset level
4) Press the [CURSOR ] key while holding down the
[RECORD] key.
The settings are immediately initialized, and
"Completed!" is shown. To cancel the initialization,
press the [CURSOR
5) Press the [ENTER] key.
"Init memory" is highlighted on the display.
6) Press the [MENU] key to exit the menu mode.
91
MR-8 Owner's Manual
] key.