Making A Call; Answering A Call - Vertu CONSTELLATION RM-389V Quick Manual

Making a call

To make a call from your Vertu phone, you should open its fold first, unless
you are using such a device as headset that supports the call handling feature.
1. Make sure that your Vertu phone is in a strong signal area and the battery
is charged fully enough (refer to "Icons and indicators" on page 21).
2. Open the fold and press the [End] key until the Home screen appears.
3. Use the Number keys (page 18) to enter the telephone number you
would like to call.
4. Press the [Send] key (page 18) to begin your call.
Tip: You can make a call quickly by selecting a person from the Contacts
list and then pressing the [Send] key. If you have not changed the default
configuration, you can launch the Contacts list by just giving a short press
on the [Navigation] key (Down) from the Home screen.
Or you can also use the All callls log. The log list can be displayed just by
pressing the [Send] key from the Home screen, or if you have not
changed the default configuration, by pressing the [Navigation] key (Left).
Making a call while the fold is closed
When you are connecting such a device as headset that supports call
handling, you can make a call directly from the conneted device even
without opening your phone (for example, by pressing the call key on the
device). For details on how to make a call from such a device, refer to the
user guide for the relevant device.

Answering a call

When you receive an incoming call, a call message appears on the inner or
outer display, and a ringing tone is played when an incoming call alert has
been enabled. Your Vertu phone will also vibrate if you have set a vibrating
alert.
You can use one of the following procedures to answer the call:
32
To answer a call when the fold is open:
1. When you have a call, select Silence (right [Selection] key) to stop the
ringing tone first.
2. To answer the call, either press the [Send] key (page 18) or press the
centre [SELECT] key when you see Answer on the screen.
To answer a call while the fold is closed (Case 1 with headset connected):
You can answer an incoming call without opening your Vertu phone, if a
headset or other device that has a call handling capability, is connected.
1. When you have a call, push the [Sliding] key (page 21) up, and then tap
the [Silence] button (page 20) on the outer display if you would like to
turn off the ringing tone first.
2. Follow a procedure as required by the connected device to answer the
call (for example, press the call key on the headset).
For details on the necessary step here, refer to the user guide for the specific
>
device you use.
To answer a call while the fold is closed (Case 2 with no headset connected):
You should first open your Vertu phone to answer an incoming call, if no
headset or other device (with a call handling capability) is connected.
1. When you have a call, push the [Sliding] key (page 21) up, and then tap
the [Silence] button (page 20) on the outer display if you would like to
turn off the ringing tone first.
2. Open your Vertu phone (and if necessary, either press the [Send] key
(page 18) or select Answer (centre [SELECT] key) after opening the
fold) to answer the call.
After opening the fold, you will also need to press the [Send] key or select
>
Answer, if the following setting is Off. You can immediately answer the call just
by opening the fold, if the setting is On.
Menu » Settings » Call » Ans. if fold opened
Related pages: To reactivate the outer display when the screen
has been dimmed
→ "Outer display lock timeout and unlocking" (page 21)
Using your Vertu phone