Switching Your Vertu Phone On And Off; The [Navigation] Key; [Selection] Keys; Setting The Time And Date - Vertu Signature RM-266V Quick Manual

Switching your Vertu phone on and off

The battery may not be fully charged when you first receive your Vertu
phone. If a Battery low message is displayed when you switch on your
Vertu phone, please see "Charging the battery" (page 37), and charge your
phone.

The [Navigation] key

1
2

[Selection] keys

20
Press and hold the [Power] key to
switch your Vertu phone on or off.
The [Navigation] key (1) enables
you to move the cursor around the
display in any direction. To select
an item currently displayed, press
the [Navigation] key (Centre) (2).
The [Selection] keys enable you to
select the options displayed at the
bottom of the display, directly
above the keys.
Using your Vertu phone

Setting the time and date

When you first switch on your Vertu phone you will be prompted to enter the
time and date if they are not already set up.
Use the [Navigation] key and Number keys to enter the date and then time.
When in Japan, select GMT +9 for the time zone and +0 hours for daylight
saving time. After completing all entries, select Save to save the settings.
Note: If the battery is removed from your Vertu phone for longer than
an hour, the time and date data may be lost.

Making a call

2
Check that you are in a strong
signal area and the battery is
charged.
Use the Number keys (1) to enter
the telephone number you want to
call.
Press the [Send] key (2) to begin
your call.
1