Selecting The Monitored Signal - Tascam DR-60D Owner's Manual

Selecting the monitored signal

1. When the Home Screen is open and the unit is stopped, paused,
in recording standby or recording, press the MONITOR SELECT
button to open a pop-up menu where you can select which
signal to monitor.
Stereo recording mode
Turn the DATA dial to select which signal to monitor.
2.
Option Meaning
MIX Monitor a mix of channels 1–4.
MIX Main Monitor the dual recording mode main file.
MIX Sub Monitor the dual recording mode sub file.
CH12 Monitor a mix of channels 1–2.
CH34 Monitor a mix of channels 3–4.
Monitor the CAMERA IN jack signal.
CAMERA IN
CH1 Monitor the channel 1 input sound.
Monitor the dual recording mode main file left
CH1 Main
channel.
Monitor the dual recording mode sub file left
CH1 Sub
channel.
CH2 Monitor the channel 2 input sound.
Monitor the dual recording mode main file
CH2 Main
right channel.
4-channel recording mode
Option Meaning
Monitor the dual recording mode sub file right
CH2 Sub
channel.
CH3 Monitor the channel 3 input sound.
Monitor the dual recording mode main file left
CH3 Main
channel.
Monitor the dual recording mode sub file left
CH3 Sub
channel.
CH4 Monitor the channel 4 input sound.
Monitor the dual recording mode main file
CH4 Main
right channel.
Monitor the dual recording mode sub file right
CH4 Sub
channel.
NOTE
The monitoring options depend on the recording mode setting.
3. When finished selecting the monitoring signal, press the DATA
dial or MONITOR SELECT button to return to the Home Screen.
NOTE
When is selected, you can monitor the input sound
CAMERA IN
through the PHONES jack, but the level meters will show the
input sound according to the recording mode.
3 – Preparation
41
TASCAM DR-60D