10 – Settings and Information
System Settings and Formatting (SYSTEM)
From the
Screen, you can change various settings to
SYSTEM
optimize the device for your use environment and other require-
ments. You can also initialize the unit and format the SD card.
Press the MENU button to open the
1.
Turn the DATA dial to select
2.
/ button to open the
OTHERS
Turn the DATA dial to select
3.
/ button to open the
SYSTEM
The following settings can be made for the items on the
screen.
SYSTEM
Use the . or / button and the
item.
Setting the automatic power saving function
Use the
item to set the amount of time without
AUTO PWR SAVE
activity or operation until the unit turns off (enters standby)
automatically.
Options:
(automatic power saving is disabled, default
OFF
value),
,
3min
86
TASCAM DR-60D
screen.
MENU
, and press the DATA dial or
OTHERS
screen.
, and press the DATA dial or
SYSTEM
screen.
+
−
or
button to set each
,
,
5min
10min
30min
Setting the backlight
Use
to set the time until the backlight automatically
BACKLIGHT
turns OFF after the last operation when powered by the internal
battery.
Options:
(turned off ),
OFF
,
,
sec
30 sec
Adjusting the display contrast
Use
to adjust the display contrast.
CONTRAST
Options:
–
(factory setting:
1
20
Setting the type of AA batteries
Use
to set the type of the AA batteries that you are
BATTERY TYPE
using. This setting is used to show the amount of remaining battery
charge and determine if the unit has enough power for normal
operation.
Values:
(alkaline batteries, default),
ALKAL
metal hydride batteries)
Setting the phantom power voltage
Use the
item to set the voltage of the phantom
PHANTOM VOL T
power supplied when external mics that require it are connected.
Options:
,
(factory setting)
+24V
+48V
NOTE
Battery power will be consumed faster when set to +48V than
when set to +24V.
(factory setting),
5 sec
10 sec
(always on)
ALWAYS
)
5
(nickel-
Ni -MH
,
15