Mark Function; Adding Marks Manually To A Recording; Adding Marks Automatically To A Recording; Moving To A Mark Position - Tascam DR-60D Owner's Manual

Mark function

Adding marks manually to a recording

You can manually add marks to a recording where you want them.
Press the DATA dial while recording to add a mark.
1.
Mark number pull-up appears.
NOTE
•
Mark information is stored in the file with numbers between
– . The maximum number of marks in a file is 99.
01 99
•
Marks added to BWF format WAV files by this unit during
recording are stored in the file. These marks can be used when
playing back the file using software or equipment that supports
the BWF format.

Adding marks automatically to a recording

This function allows the unit to add marks automatically using
.
REC
On the screen, set the
AUTO REC
See "Recording automatically (AUTO REC)" on page 56.

Moving to a mark position

You can move to marks in the currently selected file when stopped
or playing back.
You can use this function to identify points to create shortcuts to the
beginning of songs, for example.
1. Press the . or / button while pressing and holding the
DATA dial during playback or when stopped.
NOTE
You cannot move to a mark in a different file.
4 – Recording
AUTO
item to .
MODE MARK
59
TASCAM DR-60D