Table of Contents
Advertisement
4 – Recording
Setting auto tone length
You can set the length of the auto tone.
Press the MENU button to open the MENU screen.
1.
Turn the DATA dial to select
2.
dial or / button to open the
Turn the DATA dial to select
3.
dial or / button.
4.
Turn the DATA dial to set the length of the tone.
Options:
,
0. 5sec
1sec
When finished making the setting, press the stop (8) [HOME]
5.
button to return to the Home Screen.
62
TASCAM DR-60D
, and press the DATA
REC SETTING
screen.
REC SETTING
, and press the DATA
TONE SECS
(default value),
,
2sec
3sec
Adding slate tones
When enabled, you can press the SLATE button on the front of the
unit during recording to add a slate tone whenever you like to the
recording file.
The SLATE button is disabled by default in order to prevent
accidental operation. Follow the procedures below to enable the
SLATE button.
For details about connecting a DSLR camera to this unit, see "Camera
connection and attachment" on page 39.
Press the MENU button to open the
1.
2.
Turn the DATA dial to select
dial or / button to open the
Turn the DATA dial to select
3.
dial or / button.
Turn the DATA dial to enable the SLATE button.
4.
Options:
(default value),
D ISABLE
When finished making the setting, press the stop (8) [HOME]
5.
button to return to the Home Screen.
NOTE
To prevent accidental operation, the SLATE button will not
function if pressed continuously.
screen.
MENU
, and press the DATA
REC SETTING
screen.
REC SETTING
, and press the DATA
SLATE KEY
ENABLE
Advertisement
Table of Contents
