Table of Contents
Advertisement
5 − Playback
repeat. If you cancel during playback, playback
will continue past the point specified as the end-
ing point of A-B repeat playback.
NOTE
•
If you press the STOP key to stop playback, the
specified region (A-B) will be cleared.
•
You can't specify A-B repeat playback across tracks.
In the home screen, A-B will light (in addition to REPEAT ).
The region (A-B) has now been specified, and A-B repeat
playback will begin.
Pitch Control playback
The SS-CDR1 can modify the pitch (the pitch and playback
speed) of the playback (Pitch Control playback).
Here is how to use Pitch Control playback.
1 Press the front panel
PITCH
key) to turn on Pitch Control playback.
PITCH
When this is on, the PITCH indicator in the display will
light in the home screen.
2 Turn the
knob (or use the remote's
PITCH
keys) to specify the pitch.
+/-
While you're making this setting, the display's pitch
control value is shown as
You can specify the pitch in a range of -16.0–+16.0.
To turn off Pitch Control playback:
Press the front panel
PITCH
key).
Specifying the Pitch Step
You can change the pitch step.
Pitch steps are the amount of pitch change produced by
turning the
knob one step or by pressing the
PITCH
remote's
key once.
PITCH +/-
You must make the Pitch Step setting from the SS-CDR1
itself (this setting cannot be made from the remote).
1 Hold down the front panel
The pitch step setting screen will appear.
2 While this screen is displayed, you can turn the
dial to specify the pitch step in a range
MULTI JOG
of 0.1%–1.0%.
30
TASCAM SS-CDR1
knob (or the remote's
PITCH
.
P I TCH L VL XXX%
knob (or the remote's
PITCH
knob.
PITCH
To turn off A-B Repeat playback:
Press the remote's
key or the
A-B
In the home screen, the REPEAT indicator and the A-B indica-
tor will go dark, and A-B repeat playback will be can-
celled.
The PITCH indicator in the display will go dark, and Pitch
Control playback will turn off. Even if Pitch Control play-
back is off, the pitch you specified in step 2 above is
remembered, and will be valid if you turn Pitch Control on
once again.
TIP
By using the Key Control function in conjunction with
the Pitch Control function, you can change only the
speed without affecting the pitch (see "Key Control
play" on page 31).
NOTE
When you turn Pitch Control playback on/off during
playback, the playback sound may be momentarily
interrupted.
3 When you've finished making the setting, press
the front panel
TIME (ESC)
key) to return to the home screen.
CLR/ESC
NOTE
The pitch control setting is remembered even when
you turn off the power.
key.
REPEAT
key (or the remote's
Advertisement
Table of Contents
